In a PBR metallic-roughness material, what do the base colour, metallic and roughness parameters each control?
answer
- one colour, two meanings
- metals have no diffuse term
- a shared grey reflectance for non-metals
- roughness spreads the highlight
- scalars packed into one texture
basics
~20 sBase colour is diffuse albedo for non-metals and specular reflectance (F0) for metals; metallic chooses between those two meanings; roughness sets how widely microfacet normals spread, from a sharp mirror highlight to a broad, dim one.
solid answer
~50 sA metallic-roughness material describes a surface with three main inputs. `baseColor` is the diffuse albedo when the surface is a dielectric (plastic, stone, wood) and the specular colour `F0` when it is a metal. `metallic` blends between the two cases: the shader computes `F0 = 0.04 * (1 - metallic) + baseColor * metallic` per channel and `diffuse = baseColor * (1 - metallic)`, so a metal gets a coloured reflection and no diffuse term, while a dielectric gets a grey reflectance of about 4% head-on. `roughness` controls how widely the microfacet normals spread; most shaders square it (`alpha = roughness^2`) so the slider feels perceptually even. Metallic is painted as 0 or 1 almost everywhere, with in-between values only at transitions and thin layers such as dust, and the scalar maps are often packed into the channels of one linear texture.
go deeper
Recall the two meanings of base colour, that metallic picks between them, and that roughness widens and dims the highlight. Know the 0.04 default for non-metals.
Write out how the shader derives F0 and the diffuse colour from the three inputs, why metals lose their diffuse term, and why roughness is squared before use.
Spot bad authoring from a render: mid-grey metallic everywhere, dark metal base colours, scalar maps decoded as colour. Explain the transition fringe and how packing and storage choices affect it.
Weigh metallic-roughness against specular-glossiness or an added reflectance input for a project: memory per material, how much artists can break, and which material classes need more than the core three.
## What a metallic-roughness material describes A **physically based** material does not describe "a colour plus a shininess" the way older lighting models did. It describes how a surface splits incoming light between **specular reflection** (light that bounces off the outermost interface) and **diffuse reflection** (light that enters the material, scatters inside it and comes back out). The **metallic-roughness** parameterization captures that split with a few inputs that artists paint as textures and that the shader turns into the inputs of a microfacet **BRDF** (bidirectional reflectance distribution function: how much light arriving from one direction leaves toward another). ## The three core parameters | Parameter | Stored as | Dielectric (metallic = 0) | Metal (metallic = 1) | |---|---|---|---| | **Base colour** | RGB, colour-encoded | diffuse albedo | specular colour `F0` | | **Metallic** | scalar, linear | selects the dielectric case | selects the metal case | | **Roughness** | scalar, linear | spread of the highlight | spread of the highlight | - **Base colour** has two meanings. On a non-metal it is the colour of the diffusely scattered light: red plastic, grey stone. On a metal it is the reflectance at normal incidence, `F0`, which is strongly coloured for gold or copper and nearly neutral for steel or aluminium. - **Metallic** decides which meaning applies. A real material is either a conductor or not, so painted values are almost always 0 or 1. Intermediate values appear where filtering blends a metal texel with a non-metal one, or for thin layers such as dust over metal. - **Roughness** describes how widely the microscopic facets of the surface are tilted. Low roughness gives a small, bright highlight and sharp reflections; high roughness spreads the same reflected energy over a wide lobe, so the highlight grows larger and dimmer. ## How the shader turns them into BRDF inputs 1. Specular colour: `F0 = 0.04 * (1 - metallic) + baseColor * metallic`, a blend applied per colour channel. Most non-metals reflect roughly 2-5% of light head-on, so one grey value of 0.04 stands in for all of them. 2. Diffuse colour: `diffuseColor = baseColor * (1 - metallic)`. Light refracted into a metal is absorbed within a tiny distance, so a metal has no diffuse term at all. 3. Roughness remap: `alpha = roughness * roughness`. Squaring makes equal slider steps look like equal visual steps; `alpha` is what the distribution and geometry terms consume. 4. Shading: a diffuse term (often Lambert, `diffuseColor / pi`) plus a microfacet specular term driven by `F0` and `alpha`, evaluated for each light and for the environment. ``` F0 = 0.04 * (1 - metallic) + baseColor * metallic // per channel diffuseColor = baseColor * (1 - metallic) alpha = roughness * roughness ``` ## One sky, three materials The parameterization earns its keep when very different surfaces share one lighting setup and all still look right: - **Brushed metal**: metallic 1, base colour a fairly bright neutral grey (the metal's `F0`), medium roughness. Isotropic roughness gives a soft, round highlight; the streaks of real brushing need an extra anisotropy input that the core set lacks. - **Rough plastic**: metallic 0, base colour the pigment, high roughness. Its colour comes from the diffuse term, and its faint, broad highlight is uncoloured because its `F0` is the shared 0.04. - **Wet stone**: metallic 0, base colour darker than dry stone because water filling the pores traps more light, and roughness much lower because a water film smooths the surface. It stays a dielectric. None of these values bakes in a light direction or a light colour, which is why the same three materials stay consistent from noon to sunset. ## Packing and storage - Base colour is colour data and is normally stored with a colour (sRGB) encoding; metallic, roughness and ambient occlusion are plain numbers and are stored linearly. - The scalar maps are often packed into the channels of one texture, for example occlusion, roughness and metallic in red, green and blue, which saves fetches and memory. - Some material models add a scalar **reflectance** input so that a dielectric's `F0` can move away from 0.04 for materials such as gemstones. ## Metallic-roughness vs specular-glossiness | | Metallic-roughness | Specular-glossiness | |---|---|---| | Inputs | base colour, metallic, roughness | diffuse colour, specular colour, glossiness | | Channels | 5 | 7 | | Dielectric `F0` | fixed near 0.04 | painted per texel | | Physically impossible combinations | hard to author | easy to author | | Typical artefact | thin fringe where metal meets non-metal | a surface reflecting more light than it receives | Glossiness is roughly `1 - roughness`. Metallic-roughness is the more common choice because it is cheaper to store and hard to misuse; specular-glossiness gives more control at the price of letting an artist paint a bright coloured specular on top of a bright diffuse.
- Why should metallic be painted as 0 or 1 rather than in-between values?A real material is either a conductor or not. A value of 0.5 halves the diffuse colour and sets F0 halfway between 0.04 and the base colour, describing a material that does not exist and looks dull and murky. Intermediate values are fine only where they stand for a mix inside the texel, such as dust, corrosion or a filtered transition between a metal texel and a painted one.
- What does a specular-glossiness workflow offer that metallic-roughness does not?An explicit RGB specular colour per texel, so a dielectric's F0 can differ from 0.04 and coated or gem-like surfaces are easy to express. The cost is seven channels instead of five and the freedom to author impossible materials, such as a bright coloured specular over a bright diffuse that together reflect more light than arrives.
- Why do many shaders square the painted roughness before using it?Highlight width does not change linearly with the distribution's alpha parameter: most of the visible change happens at low alpha. Treating the painted value as perceptual roughness and using alpha = roughness squared spreads the visual change evenly across the slider, so artists get fine control over glossy materials instead of a slider that jumps from mirror to matte.
- A metal needs a dark base colour because it reflects instead of absorbing.
- Roughness only scales how bright the highlight is, not its size.
- A dielectric's highlight should be tinted by its base colour.
- Metallic 0.5 is a sensible default for a semi-shiny surface.
- Roughness and metallic maps should use the same colour encoding as base colour.